{"id":6575,"date":"2026-05-21T03:57:04","date_gmt":"2026-05-21T02:57:04","guid":{"rendered":"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/"},"modified":"2026-05-21T13:28:07","modified_gmt":"2026-05-21T12:28:07","slug":"how-to-inflate-foil-balloons-properly","status":"publish","type":"post","link":"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/","title":{"rendered":"How to Inflate Foil Balloons Properly"},"content":{"rendered":"

A foil balloon that wrinkles, leans or splits at the seam is rarely a product fault. More often, it comes down to inflation technique. If you need to know how to inflate foil balloons correctly for retail, d\u00e9cor work or event installation, the key is matching the balloon type to the right gas, nozzle and finish point.<\/p>\n

Foils are straightforward once you understand how the self-sealing valve works and where the tolerance sits. That matters in trade environments, because overinflation wastes stock and underinflation looks poor on display. Whether you are preparing single birthday numbers for shop sale or building larger arrangements for a venue, a consistent method saves time and reduces preventable losses.<\/p>\n

How to inflate foil balloons without damaging them<\/h5>\n

Most foil balloons are fitted with a self-sealing valve. You do not inflate them through the body of the balloon or by stretching the neck as you would with latex. Instead, you insert the nozzle or straw into the valve opening, inflate slowly, and stop when the surface is smooth and firm.<\/p>\n

The valve is usually found behind the inflation tab at the base of the balloon. On shaped designs, it may sit lower than expected, so it is worth checking before applying pressure. If the nozzle is pushed outside the valve channel rather than into it, the balloon will not fill properly and you risk damaging the seal.<\/p>\n

For standard 18 inch foils<\/a>, this is usually a quick process. Larger supershapes<\/a>, numbers and letters need a bit more patience because the fill spreads through multiple chambers or wider panels. The mistake many people make is trying to rush the final stage. A foil should look full, not drum-tight.<\/p>\n

Start with the right inflation method<\/h5>\n

Before you begin, decide whether the balloon is intended for float or display. Helium is used when the balloon needs to float. Air is used for displays, garlands, stacked work, wall d\u00e9cor and any application where flotation is not required. That sounds obvious, but it is a common source of avoidable cost in busy periods.<\/p>\n

Not every foil balloon is suitable for helium. Mini foils, particularly small letters and shapes, are often air-fill only because they do not have enough lift capacity. If you put helium into a balloon that cannot float, you add cost without any practical benefit. For trade buyers, that affects margin quickly across volume work.<\/p>\n

Using helium to inflate foil balloons<\/h5>\n

If you are filling with helium, use a regulator and an appropriate foil nozzle. Insert the nozzle gently into the valve until you can feel it pass through the seal. Hold the balloon around the valve area to prevent the nozzle slipping, then inflate in a controlled way.<\/p>\n

Watch the corners and seams as the balloon fills. Foil does not expand with the same forgiveness as latex, so the finish point matters. Stop when the wrinkles have just disappeared and the shape looks even. If the seams start to look stressed or angular, you are already close to overfilling.<\/p>\n

Temperature also affects the result. A foil filled in a cold stockroom may tighten significantly when moved into a warmer venue or shop floor. In practical terms, that means leaving a little tolerance if the balloon is travelling or moving between environments.<\/p>\n

Using air for display work<\/h5>\n

Air inflation is often the better option for letters, small shapes and structured d\u00e9cor. A hand pump, electric inflator with the correct attachment, or even a simple inflation straw can all work, depending on the balloon size and volume of the job.<\/p>\n

For smaller foils, a straw gives excellent control. Insert it into the valve, inflate gradually, and remove it once the balloon is full enough to hold shape with a smooth finish. Because the valve self-seals, no tying is needed in most cases. For larger display quantities, trade users usually move to a more efficient air-fill setup to keep prep time down.<\/p>\n

How to inflate foil balloons step by step<\/h5>\n

The process is simple, but consistency matters more than speed.<\/p>\n

First, inspect the balloon in pack if possible and confirm whether it is helium suitable or air-fill only. Then locate the valve and check that it is open and unobstructed. Insert the nozzle or straw carefully into the valve channel rather than forcing it between the layers.<\/p>\n

Next, inflate slowly. Let the shape form fully before deciding whether it needs more gas. This is especially important with numbers, licensed shapes and larger character foils, where one section may fill ahead of another. Rotate the balloon if needed and check both sides for symmetry.<\/p>\n

Finally, stop at the correct finish point. The surface should be smooth with only light firmness, not excessive tension. Remove the nozzle cleanly and confirm the valve has sealed. If the balloon is being ribboned, weighted or built into d\u00e9cor, do that after checking the seams and overall presentation.<\/p>\n

What proper inflation looks like<\/h5>\n

A properly inflated foil balloon has a clean outline, smooth panels and no obvious creasing across the main face. It should not bulge heavily at one point while remaining soft elsewhere. With numbers and letters, the edges should appear defined but not stretched.<\/p>\n

Underinflation leaves the balloon looking tired and unstable, which is a poor result in both retail and event settings. Overinflation usually shows first at the seams. You may also see the design distort slightly, particularly on printed shapes. Neither gives a professional finish.<\/p>\n

Common problems when inflating foil balloons<\/h5>\n

If a foil balloon will not inflate, the nozzle is often not fully inside the valve. Reposition it and try again. If air or helium escapes immediately, check whether the seal has been damaged during insertion or if the balloon has a puncture.<\/p>\n

If the balloon looks misshapen, it may simply need a more even fill. Some large foils distribute gas slowly between sections, so a short pause can help before adding more. If one chamber remains flat, inspect for an internal blockage or manufacturing fault.<\/p>\n

Splitting is almost always linked to overinflation or temperature change. Foils have less give than latex, so filling them to maximum firmness is rarely the right approach. In a trade setting, that is why staff training and consistent inflation practice are worth the effort.<\/p>\n

Mini foils need different handling<\/h5>\n

Mini foil balloons<\/a> catch people out because they look similar to standard foils in pack, but they are usually intended for air fill only. They are widely used on sticks, in gift work, cake d\u00e9cor setups and smaller display formats. Trying to helium fill them is not efficient and generally will not produce a floating result.<\/p>\n

They are also easier to overinflate because of their smaller internal capacity. Use a straw or fine air-fill nozzle and stop as soon as the wrinkles clear. A tight mini foil is far more likely to fail than a standard shape with a little tolerance left in it.<\/p>\n

Storage, transport and timing<\/h5>\n

Inflation is only part of the job. How the balloons are handled afterwards affects performance just as much. Foils should be stored away from sharp stock, heat sources and direct sunlight. If they are inflated ahead of an event, allow for transport conditions and venue temperature.<\/p>\n

For helium-filled work, timing depends on the balloon type, size and environment. Foils generally hold gas well, but that does not mean every job should be inflated as early as possible. For premium presentation, many professionals prefer to inflate closer to dispatch or setup time, particularly on high-value installs.<\/p>\n

For air-filled d\u00e9cor, pre-inflation often makes operational sense. It depends on space, the design format and whether the balloons need to be assembled on site. A rushed inflation window can create more waste than a planned prep schedule.<\/p>\n

Trade advice for cleaner results<\/h5>\n

If foil balloons are part of your regular offering, standardising your setup helps. Use the right inflators, train staff to recognise proper fill points, and separate air-fill and helium-suitable lines clearly in your prep area. This reduces mistakes during seasonal peaks when temporary staff or high order volume can put pressure on workflow.<\/p>\n

It is also worth keeping inflation guidance close to hand for different formats, especially numbers, licensed supershapes and mini foils. Businesses that treat inflation as a technical step rather than an afterthought tend to get better presentation, fewer failures and stronger resale confidence. That is one reason experienced trade suppliers such as Go International place so much emphasis on practical balloon handling advice alongside stock availability.<\/p>\n

A well-inflated foil balloon should look effortless to the customer. Behind that, there is a method – steady fill, correct gas choice and the discipline to stop before the seams do.<\/p>\n","protected":false},"excerpt":{"rendered":"

Learn how to inflate foil balloons properly with helium or air, avoid split seams, find the valve, and get a cleaner finish for events and resale.<\/p>\n","protected":false},"author":2,"featured_media":6576,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-6575","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorised"],"yoast_head":"\nHow to Inflate Foil Balloons Properly - GO International Blog<\/title>\n<meta name=\"description\" content=\"Learn how to inflate foil balloons properly with helium or air, avoid split seams, find the valve, and get a cleaner finish for events and resale.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/\" \/>\n<meta property=\"og:locale\" content=\"en_GB\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Inflate Foil Balloons Properly - GO International Blog\" \/>\n<meta property=\"og:description\" content=\"Learn how to inflate foil balloons properly with helium or air, avoid split seams, find the valve, and get a cleaner finish for events and resale.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/\" \/>\n<meta property=\"og:site_name\" content=\"GO International Blog\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/GoInternationalUK\" \/>\n<meta property=\"article:published_time\" content=\"2026-05-21T02:57:04+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-05-21T12:28:07+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.gointernational.co.uk\/blog\/wp-content\/uploads\/2026\/05\/how-to-inflate-foil-balloons-properly-featured.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"1536\" \/>\n\t<meta property=\"og:image:height\" content=\"1024\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"author\" content=\"GO International\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"GO International\" \/>\n\t<meta name=\"twitter:label2\" content=\"Estimated reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"7 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/how-to-inflate-foil-balloons-properly\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/how-to-inflate-foil-balloons-properly\\\/\"},\"author\":{\"name\":\"GO International\",\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/e245e4d6fb2fea16723c507151697ffa\"},\"headline\":\"How to Inflate Foil Balloons Properly\",\"datePublished\":\"2026-05-21T02:57:04+00:00\",\"dateModified\":\"2026-05-21T12:28:07+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/how-to-inflate-foil-balloons-properly\\\/\"},\"wordCount\":1450,\"publisher\":{\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/how-to-inflate-foil-balloons-properly\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/how-to-inflate-foil-balloons-properly-featured.webp\",\"inLanguage\":\"en-GB\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/how-to-inflate-foil-balloons-properly\\\/\",\"url\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/how-to-inflate-foil-balloons-properly\\\/\",\"name\":\"How to Inflate Foil Balloons Properly - GO International Blog\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/how-to-inflate-foil-balloons-properly\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/how-to-inflate-foil-balloons-properly\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/how-to-inflate-foil-balloons-properly-featured.webp\",\"datePublished\":\"2026-05-21T02:57:04+00:00\",\"dateModified\":\"2026-05-21T12:28:07+00:00\",\"description\":\"Learn how to inflate foil balloons properly with helium or air, avoid split seams, find the valve, and get a cleaner finish for events and resale.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/how-to-inflate-foil-balloons-properly\\\/#breadcrumb\"},\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/how-to-inflate-foil-balloons-properly\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/how-to-inflate-foil-balloons-properly\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/how-to-inflate-foil-balloons-properly-featured.webp\",\"contentUrl\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/how-to-inflate-foil-balloons-properly-featured.webp\",\"width\":1536,\"height\":1024,\"caption\":\"How to Inflate Foil Balloons Properly\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/how-to-inflate-foil-balloons-properly\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Inflate Foil Balloons Properly\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/\",\"name\":\"GO International Blog\",\"description\":\"Party Ideas & Trends, Business Advice & NEW Product Launches\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-GB\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/#organization\",\"name\":\"GO International\",\"url\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2024\\\/11\\\/logo.png\",\"contentUrl\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2024\\\/11\\\/logo.png\",\"width\":250,\"height\":88,\"caption\":\"GO International\"},\"image\":{\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/GoInternationalUK\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UCdf4xXMAxf_c1PFZQU-Lc6g\",\"https:\\\/\\\/www.instagram.com\\\/gointernationaluk\\\/?hl=en\",\"https:\\\/\\\/www.tiktok.com\\\/@gointernationaluk\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.gointernational.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/e245e4d6fb2fea16723c507151697ffa\",\"name\":\"GO International\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/58f7e5b32c6f6383cafe24cd01e44e10f5cac5a3102786ed2436b83fd79ada50?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/58f7e5b32c6f6383cafe24cd01e44e10f5cac5a3102786ed2436b83fd79ada50?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/58f7e5b32c6f6383cafe24cd01e44e10f5cac5a3102786ed2436b83fd79ada50?s=96&d=mm&r=g\",\"caption\":\"GO International\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Inflate Foil Balloons Properly - GO International Blog","description":"Learn how to inflate foil balloons properly with helium or air, avoid split seams, find the valve, and get a cleaner finish for events and resale.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/","og_locale":"en_GB","og_type":"article","og_title":"How to Inflate Foil Balloons Properly - GO International Blog","og_description":"Learn how to inflate foil balloons properly with helium or air, avoid split seams, find the valve, and get a cleaner finish for events and resale.","og_url":"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/","og_site_name":"GO International Blog","article_publisher":"https:\/\/www.facebook.com\/GoInternationalUK","article_published_time":"2026-05-21T02:57:04+00:00","article_modified_time":"2026-05-21T12:28:07+00:00","og_image":[{"width":1536,"height":1024,"url":"https:\/\/www.gointernational.co.uk\/blog\/wp-content\/uploads\/2026\/05\/how-to-inflate-foil-balloons-properly-featured.webp","type":"image\/webp"}],"author":"GO International","twitter_card":"summary_large_image","twitter_misc":{"Written by":"GO International","Estimated reading time":"7 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/#article","isPartOf":{"@id":"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/"},"author":{"name":"GO International","@id":"https:\/\/www.gointernational.co.uk\/blog\/#\/schema\/person\/e245e4d6fb2fea16723c507151697ffa"},"headline":"How to Inflate Foil Balloons Properly","datePublished":"2026-05-21T02:57:04+00:00","dateModified":"2026-05-21T12:28:07+00:00","mainEntityOfPage":{"@id":"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/"},"wordCount":1450,"publisher":{"@id":"https:\/\/www.gointernational.co.uk\/blog\/#organization"},"image":{"@id":"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/#primaryimage"},"thumbnailUrl":"https:\/\/www.gointernational.co.uk\/blog\/wp-content\/uploads\/2026\/05\/how-to-inflate-foil-balloons-properly-featured.webp","inLanguage":"en-GB"},{"@type":"WebPage","@id":"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/","url":"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/","name":"How to Inflate Foil Balloons Properly - GO International Blog","isPartOf":{"@id":"https:\/\/www.gointernational.co.uk\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/#primaryimage"},"image":{"@id":"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/#primaryimage"},"thumbnailUrl":"https:\/\/www.gointernational.co.uk\/blog\/wp-content\/uploads\/2026\/05\/how-to-inflate-foil-balloons-properly-featured.webp","datePublished":"2026-05-21T02:57:04+00:00","dateModified":"2026-05-21T12:28:07+00:00","description":"Learn how to inflate foil balloons properly with helium or air, avoid split seams, find the valve, and get a cleaner finish for events and resale.","breadcrumb":{"@id":"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/#breadcrumb"},"inLanguage":"en-GB","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/"]}]},{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/#primaryimage","url":"https:\/\/www.gointernational.co.uk\/blog\/wp-content\/uploads\/2026\/05\/how-to-inflate-foil-balloons-properly-featured.webp","contentUrl":"https:\/\/www.gointernational.co.uk\/blog\/wp-content\/uploads\/2026\/05\/how-to-inflate-foil-balloons-properly-featured.webp","width":1536,"height":1024,"caption":"How to Inflate Foil Balloons Properly"},{"@type":"BreadcrumbList","@id":"https:\/\/www.gointernational.co.uk\/blog\/how-to-inflate-foil-balloons-properly\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.gointernational.co.uk\/blog\/"},{"@type":"ListItem","position":2,"name":"How to Inflate Foil Balloons Properly"}]},{"@type":"WebSite","@id":"https:\/\/www.gointernational.co.uk\/blog\/#website","url":"https:\/\/www.gointernational.co.uk\/blog\/","name":"GO International Blog","description":"Party Ideas & Trends, Business Advice & NEW Product Launches","publisher":{"@id":"https:\/\/www.gointernational.co.uk\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.gointernational.co.uk\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-GB"},{"@type":"Organization","@id":"https:\/\/www.gointernational.co.uk\/blog\/#organization","name":"GO International","url":"https:\/\/www.gointernational.co.uk\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/www.gointernational.co.uk\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/www.gointernational.co.uk\/blog\/wp-content\/uploads\/2024\/11\/logo.png","contentUrl":"https:\/\/www.gointernational.co.uk\/blog\/wp-content\/uploads\/2024\/11\/logo.png","width":250,"height":88,"caption":"GO International"},"image":{"@id":"https:\/\/www.gointernational.co.uk\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/GoInternationalUK","https:\/\/www.youtube.com\/channel\/UCdf4xXMAxf_c1PFZQU-Lc6g","https:\/\/www.instagram.com\/gointernationaluk\/?hl=en","https:\/\/www.tiktok.com\/@gointernationaluk"]},{"@type":"Person","@id":"https:\/\/www.gointernational.co.uk\/blog\/#\/schema\/person\/e245e4d6fb2fea16723c507151697ffa","name":"GO International","image":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/secure.gravatar.com\/avatar\/58f7e5b32c6f6383cafe24cd01e44e10f5cac5a3102786ed2436b83fd79ada50?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/58f7e5b32c6f6383cafe24cd01e44e10f5cac5a3102786ed2436b83fd79ada50?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/58f7e5b32c6f6383cafe24cd01e44e10f5cac5a3102786ed2436b83fd79ada50?s=96&d=mm&r=g","caption":"GO International"}}]}},"_links":{"self":[{"href":"https:\/\/www.gointernational.co.uk\/blog\/wp-json\/wp\/v2\/posts\/6575","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.gointernational.co.uk\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.gointernational.co.uk\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.gointernational.co.uk\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.gointernational.co.uk\/blog\/wp-json\/wp\/v2\/comments?post=6575"}],"version-history":[{"count":1,"href":"https:\/\/www.gointernational.co.uk\/blog\/wp-json\/wp\/v2\/posts\/6575\/revisions"}],"predecessor-version":[{"id":6583,"href":"https:\/\/www.gointernational.co.uk\/blog\/wp-json\/wp\/v2\/posts\/6575\/revisions\/6583"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.gointernational.co.uk\/blog\/wp-json\/wp\/v2\/media\/6576"}],"wp:attachment":[{"href":"https:\/\/www.gointernational.co.uk\/blog\/wp-json\/wp\/v2\/media?parent=6575"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.gointernational.co.uk\/blog\/wp-json\/wp\/v2\/categories?post=6575"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.gointernational.co.uk\/blog\/wp-json\/wp\/v2\/tags?post=6575"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}